BTA bottle cage adapter for the Canyon CFR and Canyon SLX with disc brakes
Our Rockairlabs BTA (between the arms) bottle cage adapter offers you the opportunity to customize your cockpit specifically to your needs. Mounting a bottle between the arms is a very simple way to positively influence the air resistance of your frontal silhouette and save watts. You can clamp your drinking tube in the appropriate recess on the left-hand side in the direction of travel. The problem of the hose connector sticking poorly or not at all via a magnet is thus reliably solved.
We offer our BTA adapter in different angles of attack (5°, 10°, 15°, 20° and 25°). Depending on the angle of attack of your monopost, you select the number of degrees accordingly, it should always be at least the same size, so with a 10° monopost, select at least the 10° BTA adapter.
The Rockairlabs BTA bottle cage adapter is very slim and only 2 cm wide. At the same time, we achieve extremely high impact and temperature resistance by using a material specially manufactured for us in Europe. At the same time, the material remains slightly flexible and is mechanically almost indestructible.
Your bottle cage is screwed directly into the material with the enclosed M5 hexagon socket screws, thus eliminating the use of force-limiting threaded inserts in the pressure part as a weak point. We supply the Canyon BTA for your CFR or SLX with two possible mounting positions for your bottle cage.
The BTA bottle cage adapter is a product from Rockairlabs, i.e. not an original Canyon manufacturer part.
Do you need a different dimension (angle, height) or are you looking for a BTA that fits your bike? Send us an email to customize@rockerplates.de
Scope of delivery:
- one piece of Rockairlabs BTA bottle cage adapter in the selected version in 5°,10°,15°,20°,25°
- two cylinder head screws 5 x 22 mm, hexagon socket, stainless steel A2
- two TX 2.9 x 13 screws, A2 stainless steel
Material:
- extremely impact-resistant plastic, high chemical resistance and high temperature resistance
- manufactured using the FDM process
- the individual layers are visible on the product
Dimensions:
- Length 100 mm
- Width of the fastening tab 31 mm / upper width 20 mm
- 64 mm distance for bottleholder which is standard
