Rubber isolators for your DIY Rocker Plate with the size of 50 by 50 mm
These DIY Rocker Plates rubber isolators are used to mount your wooden plates of your Rocker Plate / Banana Plate together properly. The isolators have a metric coil of M10 on both sides. You will find the corresponding DIY Rocker Plate M10 hexagon screws in our shop.
the rubber buffers / silent blocks / isolators are flexible, which allows the top plate to rock.
This is how the magic of hours of trainertime is done. With our 5" balls the dampening feature of the Rocker Plate is achieved, the isolators will reset your top plate back to level....
On full size Rocker Plates / Banana Plates we recommend the usage of 5 - 6 isolators, as you need to hold your complete system (Bike, trainer, Zwiftavator, Climbr etc.) Smaller Rocker Plates are usually equipped with three isolators.
The DIY Silentblock is delivered in natural rubber with a hardness of 55 +/- 5 Shore A
in the box:
- one piece DIY Rocker Plate Isolator
- 50mm height / 50 mm width
- metric 10 mm inner coil on both sides
- hardness 55 +/-5 Shore A
Product weight: | 0,20 Kg |